Note
Click here to download the full example code or to run this example in your browser via Binder
Fermi-LAT with Gammapy#
Data inspection and preliminary analysis with Fermi-LAT data.
Introduction#
This tutorial will show you how to work with Fermi-LAT data with Gammapy. As an example, we will look at the Galactic center region using the high-energy dataset that was used for the 3FHL catalog, in the energy range 10 GeV to 2 TeV.
We note that support for Fermi-LAT data analysis in Gammapy is very limited. For most tasks, we recommend you use Fermipy, which is based on the Fermi Science Tools (Fermi ST).
Using Gammapy with Fermi-LAT data could be an option for you if you want to do an analysis that is not easily possible with Fermipy and the Fermi Science Tools. For example a joint likelihood fit of Fermi-LAT data with data e.g. from H.E.S.S., MAGIC, VERITAS or some other instrument, or analysis of Fermi-LAT data with a complex spatial or spectral model that is not available in Fermipy or the Fermi ST.
Besides Gammapy, you might want to look at are Sherpa or 3ML. Or just using Python to roll your own analysis using several existing analysis packages. E.g. it it possible to use Fermipy and the Fermi ST to evaluate the likelihood on Fermi-LAT data, and Gammapy to evaluate it e.g. for IACT data, and to do a joint likelihood fit using e.g. iminuit or emcee.
To use Fermi-LAT data with Gammapy, you first have to use the Fermi ST
to prepare an event list (using gtselect and gtmktime, exposure
cube (using gtexpcube2 and PSF (using gtpsf). You can then use
EventList, maps and the
PSFMap to read the Fermi-LAT maps and PSF, i.e. support
for these high level analysis products from the Fermi ST is built in. To
do a 3D map analysis, you can use Fit for Fermi-LAT data in the same way
that it’s use for IACT data. This is illustrated in this notebook. A 1D
region-based spectral analysis is also possible, this will be
illustrated in a future tutorial.
Setup#
IMPORTANT: For this notebook you have to get the prepared 3fhl
dataset provided in your $GAMMAPY_DATA.
Note that the 3fhl dataset is high-energy only, ranging from 10 GeV
to 2 TeV.
from astropy import units as u
from astropy.coordinates import SkyCoord
# %matplotlib inline
import matplotlib.pyplot as plt
from IPython.display import display
from gammapy.data import EventList
from gammapy.datasets import Datasets, MapDataset
from gammapy.irf import EDispKernelMap, PSFMap
from gammapy.maps import Map, MapAxis, WcsGeom
from gammapy.modeling import Fit
from gammapy.modeling.models import (
Models,
PointSpatialModel,
PowerLawNormSpectralModel,
PowerLawSpectralModel,
SkyModel,
TemplateSpatialModel,
create_fermi_isotropic_diffuse_model,
)
Check setup#
from gammapy.utils.check import check_tutorials_setup
check_tutorials_setup()
System:
python_executable : /Users/terrier/Code/anaconda3/envs/gammapy-dev/bin/python
python_version : 3.8.13
machine : x86_64
system : Darwin
Gammapy package:
version : 1.0rc2
path : /Users/terrier/Code/gammapy-dev/gammapy/gammapy
Other packages:
numpy : 1.22.4
scipy : 1.9.3
astropy : 5.1
regions : 0.6
click : 8.1.3
yaml : 6.0
IPython : 8.4.0
jupyterlab : 3.4.8
matplotlib : 3.5.3
pandas : 1.5.0
healpy : 1.16.1
iminuit : 2.17.0
sherpa : 4.15.0
naima : 0.10.0
emcee : 3.1.3
corner : 2.2.1
Gammapy environment variables:
GAMMAPY_DATA : /Users/terrier/Code/gammapy-dev/gammapy-data
Events#
To load up the Fermi-LAT event list, use the EventList
class:
events = EventList.read("$GAMMAPY_DATA/fermi_3fhl/fermi_3fhl_events_selected.fits.gz")
print(events)
EventList
---------
Instrument : LAT
Telescope : GLAST
Obs. ID :
Number of events : 697317
Event rate : 0.003 1 / s
Time start : 54682.65603222222
Time stop : 57236.96833546296
Min. energy : 1.00e+04 MeV
Max. energy : 2.00e+06 MeV
Median energy : 1.59e+04 MeV
The event data is stored in a astropy.table.Table object. In case of the Fermi-LAT event list this contains all the additional information on position, zenith angle, earth azimuth angle, event class, event type etc.
print(events.table.colnames)
display(events.table[:5][["ENERGY", "RA", "DEC"]])
print(events.time[0].iso)
print(events.time[-1].iso)
energy = events.energy
energy.info("stats")
['ENERGY', 'RA', 'DEC', 'L', 'B', 'THETA', 'PHI', 'ZENITH_ANGLE', 'EARTH_AZIMUTH_ANGLE', 'TIME', 'EVENT_ID', 'RUN_ID', 'RECON_VERSION', 'CALIB_VERSION', 'EVENT_CLASS', 'EVENT_TYPE', 'CONVERSION_TYPE', 'LIVETIME', 'DIFRSP0', 'DIFRSP1', 'DIFRSP2', 'DIFRSP3', 'DIFRSP4']
ENERGY RA DEC
MeV deg deg
---------- --------- ---------
12856.5205 139.64438 -9.93702
14773.319 177.04454 60.55275
23273.527 110.21325 37.002018
41866.125 334.85287 17.577398
42463.074 316.86676 48.152477
2008-08-04 15:49:26.782
2015-07-30 11:00:41.226
name = ENERGY
mean = 28905.5 MeV
std = 61051.7 MeV
min = 10000 MeV
max = 1.99848e+06 MeV
n_bad = 0
length = 697317
As a short analysis example we will count the number of events above a certain minimum energy:
Events above 10 GeV: 697317
Events above 100 GeV: 23628
Events above 1000 GeV: 544
Counts#
Let us start to prepare things for an 3D map analysis of the Galactic
center region with Gammapy. The first thing we do is to define the map
geometry. We chose a TAN projection centered on position
(glon, glat) = (0, 0) with pixel size 0.1 deg, and four energy bins.
gc_pos = SkyCoord(0, 0, unit="deg", frame="galactic")
energy_axis = MapAxis.from_edges(
[1e4, 3e4, 1e5, 3e5, 2e6], name="energy", unit="MeV", interp="log"
)
counts = Map.create(
skydir=gc_pos,
npix=(100, 80),
proj="TAN",
frame="galactic",
binsz=0.1,
axes=[energy_axis],
dtype=float,
)
# We put this call into the same Jupyter cell as the Map.create
# because otherwise we could accidentally fill the counts
# multiple times when executing the `fill_by_coord` multiple times.
counts.fill_events(events)
print(counts.geom.axes[0])
plt.figure()
counts.sum_over_axes().smooth(2).plot(stretch="sqrt", vmax=30)
MapAxis
name : energy
unit : 'MeV'
nbins : 4
node type : edges
edges min : 1.0e+04 MeV
edges max : 2.0e+06 MeV
interp : log
<WCSAxesSubplot:xlabel='Galactic Longitude', ylabel='Galactic Latitude'>
Exposure#
The Fermi-LAT dataset contains the energy-dependent exposure for the
whole sky as a HEALPix map computed with gtexpcube2. This format is
supported by Map directly.
Interpolating the exposure cube from the Fermi ST to get an exposure cube matching the spatial geometry and energy axis defined above with Gammapy is easy. The only point to watch out for is how exactly you want the energy axis and binning handled.
Below we just use the default behaviour, which is linear interpolation
in energy on the original exposure cube. Probably log interpolation
would be better, but it doesn’t matter much here, because the energy
binning is fine. Finally, we just copy the counts map geometry, which
contains an energy axis with node_type="edges". This is non-ideal
for exposure cubes, but again, acceptable because exposure doesn’t vary
much from bin to bin, so the exact way interpolation occurs in later use
of that exposure cube doesn’t matter a lot. Of course you could define
any energy axis for your exposure cube that you like.
exposure_hpx = Map.read("$GAMMAPY_DATA/fermi_3fhl/fermi_3fhl_exposure_cube_hpx.fits.gz")
print(exposure_hpx.geom)
print(exposure_hpx.geom.axes[0])
plt.figure()
exposure_hpx.plot()
HpxGeom
axes : ['skycoord', 'energy_true']
shape : (49152, 18)
ndim : 3
nside : 64
nested : False
frame : icrs
projection : HPX
center : 0.0 deg, 0.0 deg
MapAxis
name : energy_true
unit : 'MeV'
nbins : 18
node type : center
center min : 1.0e+04 MeV
center max : 2.0e+06 MeV
interp : log
<WCSAxesSubplot:xlabel='Right Ascension', ylabel='Declination'>
For exposure, we choose a geometry with node_type=’center’,
axis = MapAxis.from_energy_bounds(
"10 GeV",
"2 TeV",
nbin=10,
per_decade=True,
name="energy_true",
)
geom = WcsGeom(wcs=counts.geom.wcs, npix=counts.geom.npix, axes=[axis])
exposure = exposure_hpx.interp_to_geom(geom)
print(exposure.geom)
print(exposure.geom.axes[0])
WcsGeom
axes : ['lon', 'lat', 'energy_true']
shape : (100, 80, 24)
ndim : 3
frame : galactic
projection : TAN
center : 0.0 deg, 0.0 deg
width : 10.0 deg x 8.0 deg
wcs ref : 0.0 deg, 0.0 deg
MapAxis
name : energy_true
unit : 'TeV'
nbins : 24
node type : edges
edges min : 1.0e-02 TeV
edges max : 2.0e+00 TeV
interp : log
Exposure is almost constant across the field of view
plt.figure()
exposure.slice_by_idx({"energy_true": 0}).plot(add_cbar=True)
<WCSAxesSubplot:xlabel='Galactic Longitude', ylabel='Galactic Latitude'>
Exposure varies very little with energy at these high energies
energy = [10, 100, 1000] * u.GeV
print(exposure.get_by_coord({"skycoord": gc_pos, "energy_true": energy}))
[3.22974080e+11 3.29585273e+11 2.90605275e+11]
Galactic diffuse background#
The Fermi-LAT collaboration provides a galactic diffuse emission model, that can be used as a background model for Fermi-LAT source analysis.
Diffuse model maps are very large (100s of MB), so as an example here, we just load one that represents a small cutout for the Galactic center region.
In this case, the maps are already in differential units, so we do not want to normalise it again.
template_diffuse = TemplateSpatialModel.read(
filename="$GAMMAPY_DATA/fermi-3fhl-gc/gll_iem_v06_gc.fits.gz", normalize=False
)
print(template_diffuse.map)
diffuse_iem = SkyModel(
spectral_model=PowerLawNormSpectralModel(),
spatial_model=template_diffuse,
name="diffuse-iem",
)
WcsNDMap
geom : WcsGeom
axes : ['lon', 'lat', 'energy_true']
shape : (120, 64, 30)
ndim : 3
unit : 1 / (cm2 MeV s sr)
dtype : >f4
Let’s look at the map of first energy band of the cube:
plt.figure()
template_diffuse.map.slice_by_idx({"energy_true": 0}).plot(add_cbar=True)
<WCSAxesSubplot:xlabel='Galactic Longitude', ylabel='Galactic Latitude'>
Here is the spectrum at the Galactic center:
dnde = template_diffuse.map.to_region_nd_map(region=gc_pos)
plt.figure()
dnde.plot()
plt.xlabel("Energy (GeV)")
plt.ylabel("Flux (cm-2 s-1 MeV-1 sr-1)")
Text(25.077931450737843, 0.5, 'Flux (cm-2 s-1 MeV-1 sr-1)')
Isotropic diffuse background#
To load the isotropic diffuse model with Gammapy, use the
TemplateSpectralModel. We are using
'fill_value': 'extrapolate' to extrapolate the model above 500 GeV:
filename = "$GAMMAPY_DATA/fermi_3fhl/iso_P8R2_SOURCE_V6_v06.txt"
diffuse_iso = create_fermi_isotropic_diffuse_model(
filename=filename, interp_kwargs={"fill_value": None}
)
We can plot the model in the energy range between 50 GeV and 2000 GeV:
plt.figure()
energy_bounds = [50, 2000] * u.GeV
diffuse_iso.spectral_model.plot(energy_bounds, yunits=u.Unit("1 / (cm2 MeV s)"))
<AxesSubplot:xlabel='Energy [GeV]', ylabel='dnde [1 / (cm2 MeV s)]'>
PSF#
Next we will tke a look at the PSF. It was computed using gtpsf, in
this case for the Galactic center position. Note that generally for
Fermi-LAT, the PSF only varies little within a given regions of the sky,
especially at high energies like what we have here. We use the
PSFMap class to load the PSF and use some of it’s
methods to get some information about it.
psf = PSFMap.read("$GAMMAPY_DATA/fermi_3fhl/fermi_3fhl_psf_gc.fits.gz", format="gtpsf")
print(psf)
RegionNDMap
geom : RegionGeom
axes : ['lon', 'lat', 'rad', 'energy_true']
shape : (1, 1, 300, 17)
ndim : 4
unit : 1 / sr
dtype : >f8
To get an idea of the size of the PSF we check how the containment radii of the Fermi-LAT PSF vari with energy and different containment fractions:
plt.figure(figsize=(8, 5))
psf.plot_containment_radius_vs_energy()
<AxesSubplot:xlabel='True Energy [MeV]', ylabel='Containment radius (deg)'>
In addition we can check how the actual shape of the PSF varies with energy and compare it against the mean PSF between 50 GeV and 2000 GeV:
plt.figure(figsize=(8, 5))
energy = [100, 300, 1000] * u.GeV
psf.plot_psf_vs_rad(energy_true=energy)
spectrum = PowerLawSpectralModel(index=2.3)
psf_mean = psf.to_image(spectrum=spectrum)
psf_mean.plot_psf_vs_rad(c="k", ls="--", energy_true=[500] * u.GeV)
plt.xlim(1e-3, 0.3)
plt.ylim(1e3, 1e6)
plt.legend()
<matplotlib.legend.Legend object at 0x14817ca00>
This is whaty the corresponding PSF kernel looks like:
psf_kernel = psf.get_psf_kernel(
position=geom.center_skydir, geom=geom, max_radius="1 deg"
)
plt.figure()
psf_kernel.to_image().psf_kernel_map.plot(stretch="log", add_cbar=True)
<WCSAxesSubplot:xlabel='Galactic Longitude', ylabel='Galactic Latitude'>
Energy Dispersion#
For simplicity we assume a diagonal energy dispersion:
e_true = exposure.geom.axes["energy_true"]
edisp = EDispKernelMap.from_diagonal_response(
energy_axis_true=e_true, energy_axis=energy_axis
)
plt.figure()
edisp.get_edisp_kernel().plot_matrix()
<AxesSubplot:xlabel='True Energy [TeV]', ylabel='Energy [MeV]'>
Fit#
Now, the big finale: let’s do a 3D map fit for the source at the Galactic center, to measure it’s position and spectrum. We keep the background normalization free.
spatial_model = PointSpatialModel(lon_0="0 deg", lat_0="0 deg", frame="galactic")
spectral_model = PowerLawSpectralModel(
index=2.7, amplitude="5.8e-10 cm-2 s-1 TeV-1", reference="100 GeV"
)
source = SkyModel(
spectral_model=spectral_model,
spatial_model=spatial_model,
name="source-gc",
)
models = Models([source, diffuse_iem, diffuse_iso])
dataset = MapDataset(
models=models,
counts=counts,
exposure=exposure,
psf=psf,
edisp=edisp,
name="fermi-dataset",
)
fit = Fit()
result = fit.run(datasets=[dataset])
print(result)
print(models)
residual = counts - dataset.npred()
plt.figure()
residual.sum_over_axes().smooth("0.1 deg").plot(
cmap="coolwarm", vmin=-3, vmax=3, add_cbar=True
)
OptimizeResult
backend : minuit
method : migrad
success : True
message : Optimization terminated successfully.
nfev : 187
total stat : 19644.30
CovarianceResult
backend : minuit
method : hesse
success : True
message : Hesse terminated successfully.
Models
Component 0: SkyModel
Name : source-gc
Datasets names : None
Spectral model type : PowerLawSpectralModel
Spatial model type : PointSpatialModel
Temporal model type :
Parameters:
index : 2.767 +/- 0.11
amplitude : 5.16e-10 +/- 1.1e-10 1 / (cm2 s TeV)
reference (frozen): 100.000 GeV
lon_0 : -0.025 +/- 0.00 deg
lat_0 : -0.041 +/- 0.00 deg
Component 1: SkyModel
Name : diffuse-iem
Datasets names : None
Spectral model type : PowerLawNormSpectralModel
Spatial model type : TemplateSpatialModel
Temporal model type :
Parameters:
norm : 0.986 +/- 0.01
tilt (frozen): 0.000
reference (frozen): 1.000 TeV
Component 2: SkyModel
Name : fermi-diffuse-iso
Datasets names : None
Spectral model type : CompoundSpectralModel
Spatial model type : ConstantSpatialModel
Temporal model type :
Parameters:
norm (frozen): 1.000
norm : 2.652 +/- 0.39
tilt (frozen): 0.000
reference (frozen): 1.000 TeV
value (frozen): 1.000 1 / sr
<WCSAxesSubplot:xlabel='Galactic Longitude', ylabel='Galactic Latitude'>
Serialisation —
To serialise the created dataset, you must proceed through the Datasets API
Datasets([dataset]).write(
filename="fermi_dataset.yaml", filename_models="fermi_models.yaml", overwrite=True
)
datasets_read = Datasets.read(
filename="fermi_dataset.yaml", filename_models="fermi_models.yaml"
)
print(datasets_read)
plt.show()
Datasets
--------
Dataset 0:
Type : MapDataset
Name : fermi-dataset
Instrument :
Models : ['source-gc', 'diffuse-iem', 'fermi-diffuse-iso']
Exercises#
Fit the position and spectrum of the source SNR G0.9+0.1.
Make maps and fit the position and spectrum of the Crab nebula.
Summary#
In this tutorial you have seen how to work with Fermi-LAT data with Gammapy. You have to use the Fermi ST to prepare the exposure cube and PSF, and then you can use Gammapy for any event or map analysis using the same methods that are used to analyse IACT data.
This works very well at high energies (here above 10 GeV), where the exposure and PSF is almost constant spatially and only varies a little with energy. It is not expected to give good results for low-energy data, where the Fermi-LAT PSF is very large. If you are interested to help us validate down to what energy Fermi-LAT analysis with Gammapy works well (e.g. by re-computing results from 3FHL or other published analysis results), or to extend the Gammapy capabilities (e.g. to work with energy-dependent multi-resolution maps and PSF), that would be very welcome!
Total running time of the script: ( 0 minutes 10.947 seconds)
