This is a fixed-text formatted version of a Jupyter notebook

• Try online

• You may download all the notebooks as a tar file.

• Source files: analysis_2.ipynb | analysis_2.py

Low level API

Prerequisites

• Understanding the gammapy data workflow, in particular what are DL3 events and instrument response functions (IRF).

• Understanding of the data reduction and modeling fitting process as shown in the analysis with the high level interface tutorial

Context

This notebook is an introduction to gammapy analysis this time using the lower level classes and functions the library. This allows to understand what happens during two main gammapy analysis steps, data reduction and modeling/fitting.

Objective: Create a 3D dataset of the Crab using the H.E.S.S. DL3 data release 1 and perform a simple model fitting of the Crab nebula using the lower level gammapy API.

Proposed approach

Here, we have to interact with the data archive (with the gammapy.data.DataStore) to retrieve a list of selected observations (gammapy.data.Observations). Then, we define the geometry of the gammapy.datasets.MapDataset object we want to produce and the maker object that reduce an observation to a dataset.

We can then proceed with data reduction with a loop over all selected observations to produce datasets in the relevant geometry and stack them together (i.e. sum them all).

In practice, we have to: - Create a gammapy.data.DataStore poiting to the relevant data - Apply an observation selection to produce a list of observations, a gammapy.data.Observations object. - Define a geometry of the Map we want to produce, with a sky projection and an energy range. - Create a gammapy.maps.MapAxis for the energy - Create a gammapy.maps.WcsGeom for the geometry - Create the necessary makers : - the map dataset maker : gammapy.makers.MapDatasetMaker - the background normalization maker, here a gammapy.makers.FoVBackgroundMaker - and usually the safe range maker : gammapy.makers.SafeMaskMaker - Perform the data reduction loop. And for every observation: - Apply the makers sequentially to produce the current gammapy.datasets.MapDataset - Stack it on the target one. - Define the gammapy.modeling.models.SkyModel to apply to the dataset. - Create a gammapy.modeling.Fit object and run it to fit the model parameters - Apply a gammapy.estimators.FluxPointsEstimator to compute flux points for the spectral part of the fit.

Setup

First, we setup the analysis by performing required imports.

%matplotlib inline
import matplotlib.pyplot as plt

from pathlib import Path
from astropy import units as u
from astropy.coordinates import SkyCoord
from regions import CircleSkyRegion

from gammapy.data import DataStore
from gammapy.datasets import MapDataset
from gammapy.maps import WcsGeom, MapAxis
from gammapy.makers import MapDatasetMaker, SafeMaskMaker, FoVBackgroundMaker
from gammapy.modeling.models import (
    SkyModel,
    PowerLawSpectralModel,
    PointSpatialModel,
    FoVBackgroundModel,
)
from gammapy.modeling import Fit
from gammapy.estimators import FluxPointsEstimator

Defining the datastore and selecting observations

We first use the gammapy.data.DataStore object to access the observations we want to analyse. Here the H.E.S.S. DL3 DR1.

data_store = DataStore.from_dir("$GAMMAPY_DATA/hess-dl3-dr1")

We can now define an observation filter to select only the relevant observations. Here we use a cone search which we define with a python dict.

We then filter the ObservationTable with gammapy.data.ObservationTable.select_observations().

selection = dict(
    type="sky_circle",
    frame="icrs",
    lon="83.633 deg",
    lat="22.014 deg",
    radius="5 deg",
)
selected_obs_table = data_store.obs_table.select_observations(selection)

We can now retrieve the relevant observations by passing their obs_id to thegammapy.data.DataStore.get_observations() method.

observations = data_store.get_observations(selected_obs_table["OBS_ID"])

Preparing reduced datasets geometry

Now we define a reference geometry for our analysis, We choose a WCS based geometry with a binsize of 0.02 deg and also define an energy axis:

energy_axis = MapAxis.from_energy_bounds(1.0, 10.0, 4, unit="TeV")

geom = WcsGeom.create(
    skydir=(83.633, 22.014),
    binsz=0.02,
    width=(2, 2),
    frame="icrs",
    proj="CAR",
    axes=[energy_axis],
)

# Reduced IRFs are defined in true energy (i.e. not measured energy).
energy_axis_true = MapAxis.from_energy_bounds(
    0.5, 20, 10, unit="TeV", name="energy_true"
)

Now we can define the target dataset with this geometry.

stacked = MapDataset.create(
    geom=geom, energy_axis_true=energy_axis_true, name="crab-stacked"
)

Data reduction

Create the maker classes to be used

The gammapy.makers.MapDatasetMaker object is initialized as well as the gammapy.makers.SafeMaskMaker that carries here a maximum offset selection.

offset_max = 2.5 * u.deg
maker = MapDatasetMaker()
maker_safe_mask = SafeMaskMaker(
    methods=["offset-max", "aeff-max"], offset_max=offset_max
)

circle = CircleSkyRegion(
    center=SkyCoord("83.63 deg", "22.14 deg"), radius=0.2 * u.deg
)
exclusion_mask = ~geom.region_mask(regions=[circle])
maker_fov = FoVBackgroundMaker(method="fit", exclusion_mask=exclusion_mask)

Perform the data reduction loop

%%time

for obs in observations:
    # First a cutout of the target map is produced
    cutout = stacked.cutout(
        obs.pointing_radec, width=2 * offset_max, name=f"obs-{obs.obs_id}"
    )
    # A MapDataset is filled in this cutout geometry
    dataset = maker.run(cutout, obs)
    # The data quality cut is applied
    dataset = maker_safe_mask.run(dataset, obs)
    # fit background model
    dataset = maker_fov.run(dataset)
    print(
        f"Background norm obs {obs.obs_id}: {dataset.background_model.spectral_model.norm.value:.2f}"
    )
    # The resulting dataset cutout is stacked onto the final one
    stacked.stack(dataset)

Background norm obs 23523: 0.99
Background norm obs 23526: 1.08
Background norm obs 23559: 0.99
Background norm obs 23592: 1.10
CPU times: user 6.8 s, sys: 229 ms, total: 7.03 s
Wall time: 7.64 s

print(stacked)

MapDataset
----------

  Name                            : crab-stacked

  Total counts                    : 2479
  Total background counts         : 2112.97
  Total excess counts             : 366.03

  Predicted counts                : 2112.97
  Predicted background counts     : 2112.97
  Predicted excess counts         : nan

  Exposure min                    : 3.75e+08 m2 s
  Exposure max                    : 3.48e+09 m2 s

  Number of total bins            : 40000
  Number of fit bins              : 40000

  Fit statistic type              : cash
  Fit statistic value (-2 log(L)) : nan

  Number of models                : 0
  Number of parameters            : 0
  Number of free parameters       : 0

Inspect the reduced dataset

stacked.counts.sum_over_axes().smooth(0.05 * u.deg).plot(
    stretch="sqrt", add_cbar=True
);

Save dataset to disk

It is common to run the preparation step independent of the likelihood fit, because often the preparation of maps, PSF and energy dispersion is slow if you have a lot of data. We first create a folder:

path = Path("analysis_2")
path.mkdir(exist_ok=True)

And then write the maps and IRFs to disk by calling the dedicated gammapy.datasets.MapDataset.write() method:

filename = path / "crab-stacked-dataset.fits.gz"
stacked.write(filename, overwrite=True)

Define the model

We first define the model, a SkyModel, as the combination of a point source SpatialModel with a powerlaw SpectralModel:

target_position = SkyCoord(ra=83.63308, dec=22.01450, unit="deg")
spatial_model = PointSpatialModel(
    lon_0=target_position.ra, lat_0=target_position.dec, frame="icrs"
)

spectral_model = PowerLawSpectralModel(
    index=2.702,
    amplitude=4.712e-11 * u.Unit("1 / (cm2 s TeV)"),
    reference=1 * u.TeV,
)

sky_model = SkyModel(
    spatial_model=spatial_model, spectral_model=spectral_model, name="crab"
)

bkg_model = FoVBackgroundModel(dataset_name="crab-stacked")

Now we assign this model to our reduced dataset:

stacked.models = [sky_model, bkg_model]

Fit the model

The gammapy.modeling.Fit class is orchestrating the fit, connecting the stats method of the dataset to the minimizer. By default, it uses iminuit.

Its constructor takes a list of dataset as argument.

%%time
fit = Fit(optimize_opts={"print_level": 1})
result = fit.run([stacked])

CPU times: user 10.8 s, sys: 1.79 s, total: 12.6 s
Wall time: 13.7 s

The FitResult contains information about the optimization and parameter error calculation.

print(result)

OptimizeResult

        backend    : minuit
        method     : migrad
        success    : True
        message    : Optimization terminated successfully.
        nfev       : 140
        total stat : 16240.97

CovarianceResult

        backend    : minuit
        method     : hesse
        success    : True
        message    : Hesse terminated successfully.

The fitted parameters are visible from the ~astropy.modeling.models.Models object.

stacked.models.to_parameters_table()

Table length=8

model	type	name	value	unit	error	min	max	frozen	is_norm	link
str16	str8	str9	float64	str14	float64	float64	float64	bool	bool	str1
crab	spectral	index	2.6000e+00		1.004e-01	nan	nan	False	False
crab	spectral	amplitude	4.5909e-11	cm-2 s-1 TeV-1	3.705e-12	nan	nan	False	True
crab	spectral	reference	1.0000e+00	TeV	0.000e+00	nan	nan	True	False
crab	spatial	lon_0	8.3619e+01	deg	3.106e-03	nan	nan	False	False
crab	spatial	lat_0	2.2024e+01	deg	2.957e-03	-9.000e+01	9.000e+01	False	False
crab-stacked-bkg	spectral	norm	9.3478e-01		2.192e-02	nan	nan	False	True
crab-stacked-bkg	spectral	tilt	0.0000e+00		0.000e+00	nan	nan	True	False
crab-stacked-bkg	spectral	reference	1.0000e+00	TeV	0.000e+00	nan	nan	True	False

Inspecting residuals

For any fit it is useful to inspect the residual images. We have a few options on the dataset object to handle this. First we can use .plot_residuals_spatial() to plot a residual image, summed over all energies:

stacked.plot_residuals_spatial(method="diff/sqrt(model)", vmin=-0.5, vmax=0.5);

In addition, we can also specify a region in the map to show the spectral residuals:

region = CircleSkyRegion(
    center=SkyCoord("83.63 deg", "22.14 deg"), radius=0.5 * u.deg
)

stacked.plot_residuals(
    kwargs_spatial=dict(method="diff/sqrt(model)", vmin=-0.5, vmax=0.5),
    kwargs_spectral=dict(region=region),
);

We can also directly access the .residuals() to get a map, that we can plot interactively:

residuals = stacked.residuals(method="diff")
residuals.smooth("0.08 deg").plot_interactive(
    cmap="coolwarm", vmin=-0.2, vmax=0.2, stretch="linear", add_cbar=True
);

Plot the fitted spectrum

Making a butterfly plot

The SpectralModel component can be used to produce a, so-called, butterfly plot showing the envelope of the model taking into account parameter uncertainties:

spec = sky_model.spectral_model

Now we can actually do the plot using the plot_error method:

energy_bounds = [1, 10] * u.TeV
spec.plot(energy_bounds=energy_bounds, energy_power=2)
ax = spec.plot_error(energy_bounds=energy_bounds, energy_power=2)

Computing flux points

We can now compute some flux points using the gammapy.estimators.FluxPointsEstimator.

Besides the list of datasets to use, we must provide it the energy intervals on which to compute flux points as well as the model component name.

energy_edges = [1, 2, 4, 10] * u.TeV
fpe = FluxPointsEstimator(energy_edges=energy_edges, source="crab")

%%time
flux_points = fpe.run(datasets=[stacked])

CPU times: user 4.01 s, sys: 627 ms, total: 4.64 s
Wall time: 5.09 s

ax = spec.plot_error(energy_bounds=energy_bounds, energy_power=2)
flux_points.plot(ax=ax, energy_power=2)

<AxesSubplot:xlabel='Energy [TeV]', ylabel='dnde (TeV / (cm2 s))'>