EventList¶

class gammapy.data.EventList(table)[source]¶

Bases: gammapy.data.EventListBase

Event list for IACT dataset

Data format specification: EVENTS

For further information, see the base class: EventListBase.

Parameters:

table : Table

Event list table

Examples

To load an example H.E.S.S. event list:

>>> from gammapy.data import EventList
>>> filename = '$GAMMAPY_DATA/hess-dl3-dr1/data/hess_dl3_dr1_obs_id_023523.fits.gz'
>>> events = EventList.read(filename)

Attributes Summary

`altaz`	ALT / AZ position computed from RA / DEC (`SkyCoord`)
`altaz_frame`	ALT / AZ frame (`AltAz`).
`altaz_from_table`	ALT / AZ position from table (`SkyCoord`)
`energy`	Event energies (`Quantity`).
`galactic`	Event Galactic sky coordinates (`SkyCoord`).
`observation_dead_time_fraction`	Dead-time fraction (float).
`observation_live_time_duration`	Live-time duration in seconds (`Quantity`).
`observation_time_duration`	Observation time duration in seconds (`Quantity`).
`observation_time_end`	Observation stop time (`Time`).
`observation_time_start`	Observation start time (`Time`).
`observatory_earth_location`	Observatory location (`EarthLocation`).
`offset`	Event offset from the array pointing position (`Angle`).
`pointing_radec`	Pointing RA / DEC sky coordinates (`SkyCoord`).
`radec`	Event RA / DEC sky coordinates (`SkyCoord`).
`time`	Event times (`Time`).
`time_ref`	Time reference (`Time`)

Methods Summary

`check`([checks])	Run checks.
`filter_circular_region`(region)	Create selection mask for event in given circular regions.
`peek`()	Quick look plots.
`plot_energy`([ax, ebounds])	Plot counts as a function of energy.
`plot_energy_offset`([ax])	Plot counts histogram with energy and offset axes.
`plot_image`()	Quick look counts map sky plot.
`plot_offset2_distribution`([ax, center])	Plot offset^2 distribution of the events.
`plot_time`([ax])	Plots an event rate time curve.
`read`(filename, **kwargs)	Read from FITS file.
`select_circular_region`(region)	Select events in circular regions.
`select_custom`(parameter, limits)	Select events with respect to a custom parameter
`select_energy`(energy_band)	Select events in energy band.
`select_offset`(offset_band)	Select events in offset band.
`select_row_subset`(row_specifier)	Select table row subset.
`select_sky_box`(lon_lim, lat_lim[, frame])	Select events in sky box.
`select_sky_cone`(center, radius)	Select events in sky circle.
`select_sky_ring`(center, inner_radius, …)	Select events in ring region on the sky.
`select_time`(time_interval)	Select events in time interval.
`stack`(event_lists, **kwargs)	Stack (concatenate) list of event lists.

Attributes Documentation

altaz¶: ALT / AZ position computed from RA / DEC (SkyCoord)

altaz_frame¶: ALT / AZ frame (AltAz).

altaz_from_table¶: ALT / AZ position from table (SkyCoord)

energy¶: Event energies (Quantity).

galactic¶

Event Galactic sky coordinates (SkyCoord).

Always computed from RA / DEC using Astropy.

observation_dead_time_fraction¶

Dead-time fraction (float). This is a keyword related to IACTs Defined as dead-time over observation time.

Dead-time is defined as the time during the observation where the detector didn’t record events: http://en.wikipedia.org/wiki/Dead_time http://adsabs.harvard.edu/abs/2004APh….22..285F

The dead-time fraction is used in the live-time computation, which in turn is used in the exposure and flux computation.

observation_live_time_duration¶

Live-time duration in seconds (Quantity).

The dead-time-corrected observation time.

In Fermi-LAT it is automatically provided in the header of the event list.
In IACTs is computed as t_live = t_observation * (1 - f_dead)

where f_dead is the dead-time fraction.

observation_time_duration¶: Observation time duration in seconds (Quantity). This is a keyword related to IACTs The wall time, including dead-time.

observation_time_end¶: Observation stop time (Time).

observation_time_start¶: Observation start time (Time).

observatory_earth_location¶: Observatory location (EarthLocation).

offset¶: Event offset from the array pointing position (Angle).

pointing_radec¶: Pointing RA / DEC sky coordinates (SkyCoord).

radec¶: Event RA / DEC sky coordinates (SkyCoord).

time¶

Event times (Time).

Notes

Times are automatically converted to 64-bit floats. With 32-bit floats times will be incorrect by a few seconds when e.g. adding them to the reference time.

time_ref¶: Time reference (Time)

Methods Documentation

check(checks='all')¶

Run checks.

This is a generator that yields a list of dicts.

filter_circular_region(region)¶

Create selection mask for event in given circular regions.

TODO: Extend to support generic regions

Parameters:

region : list of SkyRegion

List of sky regions

Returns:

index_array : numpy.ndarray

Index array of selected events

peek()[source]¶: Quick look plots.

plot_energy(ax=None, ebounds=None, **kwargs)¶: Plot counts as a function of energy.

plot_energy_offset(ax=None)¶: Plot counts histogram with energy and offset axes.

plot_image()[source]¶: Quick look counts map sky plot.

plot_offset2_distribution(ax=None, center=None, **kwargs)¶

Plot offset^2 distribution of the events.

The distribution shown in this plot is for this quantity:

offset = center.separation(events.radec).deg
offset2 = offset ** 2

Note that this method is just for a quicklook plot.

If you want to do computations with the offset or offset^2 values, you can use the line above. As an example, here’s how to compute the 68% event containment radius using numpy.percentile:

import numpy as np
r68 = np.percentile(offset, q=68)

Parameters:

ax : Axes (optional)

Axes

center : astropy.coordinates.SkyCoord

Center position for the offset^2 distribution. Default is the observation pointing position.

**kwargs :

Extra keyword arguments are passed to matplotlib.pyplot.hist.

Returns:

ax : Axes

Axes

Examples

Load an example event list:

>>> from gammapy.data import EventList
>>> events = EventList.read('$GAMMAPY_DATA/hess-dl3-dr1/data/hess_dl3_dr1_obs_id_023523.fits.gz')

Plot the offset^2 distribution wrt. the observation pointing position (this is a commonly used plot to check the background spatial distribution):

>>> events.plot_offset2_distribution()

Plot the offset^2 distribution wrt. the Crab pulsar position (this is commonly used to check both the gamma-ray signal and the background spatial distribution):

>>> import numpy as np
>>> from astropy.coordinates import SkyCoord
>>> center = SkyCoord(83.63307, 22.01449, unit='deg')
>>> bins = np.linspace(start=0, stop=0.3 ** 2, num=30)
>>> events.plot_offset2_distribution(center=center, bins=bins)

Note how we passed the bins option of matplotlib.pyplot.hist to control the histogram binning, in this case 30 bins ranging from 0 to (0.3 deg)^2.

plot_time(ax=None)¶

Plots an event rate time curve.

Parameters:

ax : Axes or None

Axes

Returns:

ax : Axes

Axes

classmethod read(filename, **kwargs)¶

Read from FITS file.

Format specification: EVENTS

Parameters:

filename : Path, str

Filename

select_circular_region(region)¶

Select events in circular regions.

TODO: Extend to support generic regions

Parameters:

region : CircleSkyRegion or list of CircleSkyRegion

(List of) sky region(s)

Returns:

event_list : EventList

Copy of event list with selection applied.

select_custom(parameter, limits)¶

Select events with respect to a custom parameter

Parameters:

parameter : str

Parameter used for the selection. Must be present in self.table.

limits : tuple

Min (inclusive) and max (exclusive) value for the parameter to be selected.

Returns:

event_list : EventList

Copy of event list with selection applied.

select_energy(energy_band)¶

Select events in energy band.

Parameters:

energy_band : Quantity

Energy band [energy_min, energy_max)

Returns:

event_list : EventList

Copy of event list with selection applied.

Examples

>>> from astropy.units import Quantity
>>> from gammapy.data import EventList
>>> event_list = EventList.read('events.fits')
>>> energy_band = Quantity([1, 20], 'TeV')
>>> event_list = event_list.select_energy()

select_offset(offset_band)[source]¶

Select events in offset band.

Parameters:

offset_band : Angle

offset band [offset_min, offset_max)

Returns:

event_list : EventList

Copy of event list with selection applied.

select_row_subset(row_specifier)¶

Select table row subset.

Parameters:

row_specifier : slice, int, or array of ints

Specification for rows to select, passed on to self.table[row_specifier].

Returns:

event_list : EventList

New event list with table row subset selected

Examples

Use a boolean mask as row_specifier:

mask = events.table[‘FOO’] > 42 events2 = events.select_row_subset(mask)

Use row index array as row_specifier:

idx = np.where(events.table[‘FOO’] > 42)[0] events2 = events.select_row_subset(idx)

select_sky_box(lon_lim, lat_lim, frame='icrs')¶

Select events in sky box.

TODO: move gammapy.catalog.select_sky_box to gammapy.utils.

select_sky_cone(center, radius)¶

Select events in sky circle.

Parameters:

center : SkyCoord

Sky circle center

radius : Angle

Sky circle radius

Returns:

event_list : EventList

Copy of event list with selection applied.

select_sky_ring(center, inner_radius, outer_radius)¶

Select events in ring region on the sky.

Parameters:

center : SkyCoord

Sky ring center

inner_radius, outer_radius : Angle

Sky ring inner and outer radius

Returns:

event_list : EventList

Copy of event list with selection applied.

select_time(time_interval)¶

Select events in time interval.

Parameters:

time_interval : astropy.time.Time

Start time (inclusive) and stop time (exclusive) for the selection.

Returns:

events : EventList

Copy of event list with selection applied.

classmethod stack(event_lists, **kwargs)¶

Stack (concatenate) list of event lists.

Calls vstack.

Parameters:

event_lists : list

list of EventList to stack